Vince's NCC-1104 Build-up Log Page Primary 5 Primary Hull Beef-up Primed 2nd Hull

Note, these pictures are from Vince H. a.k.a Panet V, These pictures are his property, also some comments have been taken and edited from image descriptions in his folder on msn groups' Modelers And Hobby Forum or from comments found in his status thread, under the Wonderfest 2004 group project forum.

Vince Beefs up the primary hull's impulse engines
Plastic and putty rough out the primary hull aft detail. This will get more attention later. Here are the basic parts for the thru-deck carrier (secondary hull now has pylons), minus the warp nacelles.
Plastic and putty rough out the primary hull aft detail. This will get more attention later. Here are the basic parts for the thru-deck carrier (secondary hull now has pylons), minus the warp nacelles.

Orthogonal views of the secondary hull primed, open bay masking still present
Primed secondary hull, off axis side view. Top view/Birds eye view of the primed secondary hull. Side view of the primed secondary hull.
An off axis side view. Bird's eye view. Side view.

Part 4 Home Part 6
The [rear] thru-deck insert Up Skip