Vince's NCC-1104 Build-up Log Page 3 A thru-deck Secondary Hull

Note, these pictures are from Vince H. a.k.a Panet V, These pictures are his property, also some comments have been taken and edited from image descriptions in his folder on msn groups' Modelers And Hobby Forum or from comments found in his status thread, under the Wonderfest 2004 group project forum.

He Starts off with bulking up the secondary hull, to form a landing deck that will open at both ends of the ship, a Thru-deck carrier
Vince, stretches the secondary hull, and makes a duplicate of the shuttle bay section. Several blocks are used to develop the hull curvature.
Vince, stretches the secondary hull, and makes a duplicate of the shuttle bay entrance for the front of the through-deck. Several blocks are used to develop the hull curvature.
Sanding the renshape & fillers to the target hull shape. Epoxy putty is used to form the rear curve and fill in spaces. . .
  Epoxy putty is used to form the rear curve and fill in spaces between the formers and renshape blocks. After the epoxy putty cures, it is given another round on the benchtop belt sander

Part 2 Home Part 4
[Orthogonal] Concept Art & Bibliography of the Bennington Class Up Skip