'Saturday Buildfest' Part I

Project Mockup, August 2nd 1503

After a Planning session (July 20th) and several dozen sketches from Tony, Larry, John, and Blappy, a mockup session was called for.  Here are the results:

Some electronics and brass stock.

A 'breadboard' electronic circuit developement tool. Some hexagonal brass stock. Hole cutters, wire stripers, and a sound recorder/play back electronic board. A 'breadboard' electronic circuit developement tool. Some hexagonal brass stock. Hole cutters, wire stripers, and a sound recorder/play back electronic board.
A 'breadboard' electronic circuit developement tool. Some hexagonal brass stock. Hole cutters, wire stripers, and a sound recorder/play back electronic board.

On to the station mockup. . .

The station neck, the flanges (for mating the neck to lower shuttle bay and upper saucer).' The top of the circuit board.
The station neck. The flanges (for mating the neck to lower shuttle bay and upper saucer). A cardboard mock up of the main suacer. Half of the Testor's area 51 flying saucer [kit].
Various [potential] gribblies. A potential Tug ship and some engine mounting gribblies.
Various [potential] gribblies. A potential Tug ship and some engine mounting gribblies.

July 28th Home Part 2
Concept Development, Space Station & Docking Slips Up Skip