Homework Log

Friday May 6th, 2005

Homework Re-Cap of the leg with the brass backing, which snapped under a slight bend test

The end is belt sanded down at an angle for coolness. The 6. Some brass pins were long enough to be bolted, now they are sliced off with the dremel diamond wheel.
The end is belt sanded down at an angle for coolness. The brass bolt pinned leg back. Some brass pins were long enough to be bolted, now they are sliced off with the dremel diamond wheel.

The gear tracks are plained level,
The leg is reinforces with brass square stock
Heat Sinks installed here and there

Wowsers, heat sinks! Those heat sinks on the side hydraulic housings look ugly. A look at the back leg were the snap bent the brass channel.
Wowsers, heat sinks! Those heat sinks on the side hydraulic housings look ugly. A look at the back leg were the snap bent the brass channel.
The leg gear tracks are bracketed with small brass square stock.
The leg gear tracks are bracketed with small brass square stock.

May 5th Home May 16th
Death Star tiles (PFK and Windows Tile),Leg Gear Tracks, & Heat Sinks Up Larry S' Universal Cockpit molded up