The Bottom half of the mold is ready for Separation
|
|
|
|
| A completed two part mold, notice the legos are 'upside down.' After making one side of the mold, I pull the lego base plate off and build up the box on the 'bottom side' to pour what will be the other half of the mold. | Breaking down the box reveals how much rubber is sucked into gaps. | |
|
|
|
| A small reservoir was made with a few bricks, they need to pulled out. | This half of the mold works to displace the resin in the other half, accept for the fire extinguishers. | The cockpit's main console. |
|
|
|
| Here's the cockpit floors and side panels. | An aerospace bang-seat. | The arm rests will also contain the control sticks. |
| May 15th | Home | Wonderfest '05 |
| Neil setups his Tank | Up | Larry J's paper to styrene Bushwhacker Mech, Mech Bay idea |