Tony's Homework review: conduit
|
|
Tony explained how he formed the conduits this time around: 'Use a brass rod to bend the solder without deforming or kinking it. Slip the brass tube over the solder right upto the point were you want the bend, and move the tube in the direction of the bend. Hold the solder gingerly with your other hand while bending. Adjust/twist the solder gently to algin the new angle if need be.' |
| A power box for the generator with solder conduit glued in place. |
|
|
| A power box for the generator with solder conduit glued in place. | With the BU generator in place it complete's the effect. |
|
|
| Tony's got the VMC legs, he's changed out some of the rather bulbous structures. | OR Walls falling down, falling down. |
| Part 78 | Home | Part 80 |
| GGRU Part 19 | Up | Rough MBGD & The Stations of the Buildday |