Homework Log, Hacking up the Mini-G

Tuesday March 21st, 2006

Page 3, Preping the Port launch bay for lighting

Oops, this conversion was going so well but here we have a breech in the port launch bay roof. These exit holes are a lot smaller, care in drilling them so that they intersect with the longitital shaft is key.
.
This conversion was going so well, but here we have a breech in the port launch bay roof. These exit holes are a lot smaller, care in drilling them so that they intersect with the longitital shaft is key.
Shuttle bay, or the forward facing opening of the launch pods. Fighter return bay, or the rear facing opening of the launch pods.
We are calling the forward facing opening the shuttle bay, it awaits it own mangled white LED.
The rear opening is the fighter return bay, that's all we see it being used for, it awaits its L array of SMT red LED & resistor.
The back wall of the cavity of the bay entrances are also moved back with carfull dremeling, room must be made for the LED and wire bundles.
Page 2 Home More Mini-G work
Review of the starboard launch bay lighting Up Carving out the engine cavities