J-57 Jefferies Space Station Refit, Last Minutes

Novemeber 10th, 2006

[Originally Planned] Back Drop Transparences are Finally Built Up & Installed

This is the Recreational Deck, a park looking like The North Des Plaines River Trail. A streched image of the prairie section in the Old School park loop.
This is the Recreational Deck, a park looking a lot like The North Des Plaines River Trail.
Zogs, multi flasher circuit, a 4060 with internal oscillator. I added these DILs (Dual In Line) headers to provide an easy attach point for each pin paired with a ground pin. Here's the resistor for the 4060, its the tiny black square, an SMT resistor.
Zogs, multi flasher circuit, a 4060 with internal oscillator.  I added these DIL (Dual In Line) headers to provide an easy attach point for each pin paired with a ground pin.  Special notes on what all the pins are for and how the antenna strobe LED is attached. Here's the resistor for the 4060, its the tiny black square, an SMT resistor.  Also seen is the 3.3 volt regulator.  Marked up to help identify the resistor and header pin ground connections.
Black CA seals the shuttle bay nav lights, tissue paper backs the (small) forced perspective transparence box to help reduce washout of the image. The really big FP box, backed with tissue paper. Anoterh FP box backed, that's all of them.
Black CA seals the shuttle bay nav lights, tissue paper backs the forced perspective transparence box to help reduce washout of the image.

J-57 Refit Part 8 Home J-57 Refit Part 10
Refit antenna Strobe, Enhanced SubSpace Transceiver, motor test Up Packing it all up