| a) | Brass fittings and hoses |
|
|
|
| b) | The vacuum chamber |
| 2. | A pressure pot (a paint pot will do) |
|
A paint tanl/pot from Harbor Freight. The paint pot's lid with its hanger installed. |
|
|||||||||
|
|
|||||||||||
| I'm using a temporary setup, 1/4 inch acrylic sheet for the vacuum chamber lid. | |||||||||||
|
|
|
This is the pot's inside lid, with the paint pick up tube and stock rubber gasket. | |||||||||
| This is the regulator and gauge that came with the paint pot. |
|
||||||||||